Aerotest Simultan HP

Dräger Aerotest Simultan HP is used to determine the quality of respiratory air of the equipment.

Features
When selecting the Dräger Aerotest Simultan HP, the quality of the breathing air from a compressor or a compressed air cylinder can be tested. The application of the test system ensures a reliable test performed in accordance with the purification standard EN 12 021.

The Aerotest product family is based on the well known Dräger-Tubes – a reliable and quick test method to detect and measure possible toxic gases. The Dräger Aerotest Simultan HP enables the
quantitative detection of a wide range of potentially harmful substances, e.g. carbon monoxide, carbon dioxide, water vapor, nitrous fumes and oil in dispersing compressed air. The values can either be determined individually or simultaneously.

The Dräger Aerotest Simultan HP can be used without using any tools, the measuring instrument can be connected via a G 5/8 connector to the highpressure air system.

Depending on the measured contaminants the test takes five to ten minutes until the Aerotest displays an indication about the degree of contamination of the breathing air.

Technical info
The Aerotest Simultan HP is serviced once after every use and is given full maintenance is once every 12 months during operation.

• Weight: 3 kg
• Dimensions: 360 x 300 x 85 mm
• Measurable oil grades: synthetic, mineral
• Connector: G 5/8
• Air pressure: 1013 mbar
• Test air flow per minute: 0.2-0.4 L